Chemical Resistant Gloves - 3 Pack
Chemical Resistant Gloves - 3 Pack
Strip multi-layer paint, varnish, and enamels in 10 minutes. Smooth, easy-brush formula cuts deep to bare timber without damaging wood fibers.
10-Minute Bubble Lift: Softens latex, oil paint, poly, enamel & varnish fast
Effortless Brush-On: Smooth liquid flow glides easily into details and tight trim
Gentle on Wood Fibers: Scrapes cleanly to bare timber without gouging or heavy grinding
Includes Heavy-Duty Gloves: Bundled with chemical-resistant forearm gauntlets
Multi-Surface Power: Safe and effective on wood, metal, brick, and masonry
Couldn't load pickup availability
Chemical Resistant Gloves - 3 Pack
How to Mix & Apply
1. Preparation: Wear standard rubber gloves and work in a well-ventilated space.
2. Mix with hot water (1:4 Ratio): In a plastic bucket or container, mix 1 part powder with 4 parts hot water (e.g., dissolve the entire 200g pouch into 800ml of hot water to produce a full 1 Liter of liquid). Stir for 30–60 seconds until dissolved into a smooth, brushable solution.
3. Brush generously: Use a synthetic brush to paint an even, liberal coat over the finish. The smooth liquid flows easily into tight moldings, carvings, and wood grain.
4. Wait 10 minutes: Let the active solution break down finish bonds. Within 10 minutes, paint, enamel, and varnish will visibly bubble and pucker.
5. Scrape & wipe clean: Use a putty knife or scraper to peel away the softened coats cleanly. Wipe the surface clean with a damp rag or mineral spirits before refinishing.
Coverage
High-Yield Liquid Concentrate: A single 200g pouch mixes with hot water to yield 1 Full Liter (34 fl oz) of active stripping solution.
Square Footage: One full batch strips approximately 60 to 80 sq. ft. of standard finished wood or metal surfaces.
Real-World Project Estimates:
• 1 Pouch (200g): Easily strips a full 6-drawer dresser, a large dining table, up to 4 interior doors, or a full set of detailed wooden chairs.
• Heavy Multi-Layer Paint (4+ Coats): For heavy historic paint or tough enamels, apply a heavier brush coat (covers approx. 45–60 sq. ft.).
• Spot Jobs: Mix 2–3 tablespoons with hot water in a cup for rapid spot stripping on cabinet doors or hardware.
Shipping & Support Info
Fast Shipping & 24/7 Support
Orders are carefully packed and shipped within 1–2 business days, excluding weekends. You’ll receive tracking information as soon as your order is on its way.
We offer fast and friendly 24/7 support. If you have any questions regarding coating removal, mixing ratios, or surface compatibility, simply reach out to our team.
Estimated Delivery Times:
| Region | Delivery Time |
|---|---|
| USA | 5–9 Days |
| Canada & Australia | 6–11 Days |
| New Zealand & UK | 7–11 Days |
| Rest of World | 8–13 Days |
Strip 5+ Layers of Paint & Varnish in 10 Minutes
Tired of hours of painful sanding and messy gouged wood? Traditional strippers either run everywhere or leave behind sticky, half-melted sludge that ruins your tools.
BareWood Strip dissolves quickly into a smooth, easy-brush liquid that glides effortlessly into tight moldings and deep wood grain. Within just 10 minutes, its fast-acting active formula bubbles and lifts up to 5+ stubborn layers of latex paint, oil enamel, polyurethane, varnish, and epoxy—letting you scrape everything away like soft butter. It cuts straight down to pristine bare timber with zero raised grain, leaving your surface completely smooth, flat, and instantly ready for fresh staining or sealing. Complete with heavy-duty chemical gauntlet gloves included in every box, you get a full professional setup to restore old wood in minutes.
Pure Chemistry, Flawless Bare Wood
Heavy sanding ruins wood profiles and pasty strippers leave sticky sludge. BareWood Strip™ penetrates deep to break polymer bonds at the root—lifting multiple finish layers in minutes while keeping wood fibers completely intact.
Frequently Asked Questions
What coatings does BareWood Strip™ remove?
BareWood Strip™ is engineered to melt and lift latex paints, oil-based paints, varnishes, lacquers, and tough multi-layer enamels. It cuts straight through decades of stubborn build-up down to the original base surface.
How long does it take to start working?
The active reaction begins immediately upon contact. You will see finishes wrinkle, bubble, and lift within 10 minutes. For thick coatings with 5+ built-up layers, allow an extra 5 minutes before scraping clean.
What surfaces can I use this on?
It is safe for all natural hardwoods and softwoods (Oak, Pine, Walnut, Teak, Cedar, etc.) without gouging or chewing up the wood. It also works exceptionally well on metal hardware, stone, brick, concrete, and masonry.
How easy is it to apply?
Unlike thick, pasty goops that drag heavily across your brush, our formula dissolves into a smooth, fluid liquid. It glides effortlessly with any standard brush into deep fluting, chair spindles, and intricate decorative carvings.
Will it damage the natural wood profile?
No. Unlike aggressive power sanding that leaves swirl marks and uneven gouges, BareWood Strip™ chemically dissolves the finish bonds from the root—allowing you to scrape straight to raw timber smoothly and evenly.
How do I clean up after scraping off the finish?
Once you have scraped away the bubbled finish, simply wipe down the bare surface with a damp rag or mineral spirits to clean any remaining trace residue. Let the wood dry completely, and it is ready for fresh stain, paint, or clear coat.
How much does one 200g pouch cover?
One 200g pouch dissolves in hot water to yield 1 Full Liter (34 fl oz) of active stripping liquid, covering approximately 60 to 80 sq. ft.—plenty for a large dining table, a 6-drawer dresser, or up to 4 interior doors.
What safety precautions should I follow?
Wear standard rubber or household cleaning gloves while mixing and applying. Work outdoors or in a well-ventilated area, avoid inhaling dust when opening the pouch, and wash hands thoroughly after use.
Money-Back Guarantee
Every order is backed by our 30-Day Risk-Free Guarantee. If BareWood Strip™ does not lift stubborn coatings and simplify your restoration project, simply contact our 24/7 support team for a prompt, hassle-free refund.